Prova S1The slide that keeps its own record.

When a stain is questioned, pull up the slide’s history: the heat, time and handling your patients’ tissue went through, from water bath to scan.

Reserve S1Order V1, get an S1 demo kit

Prova S1: a glass microscope slide with a dark sensing end and a violet light at the seam

Example record

Which step. How far out, and for how long.

One slide, from water bath to stainer. Every step timed and measured on the slide itself.

S1-0264P-2048 / HER21 interval to review
  1. Recording started
  2. Tissue mounted45.1 °C, 38 s in the flotation bath
  3. Drying59.8 °C for 30 min
  4. Transfer 5 min over12 min against your lab’s 7 min limit
    Review note

    Rack held while the instrument was prepared.

    J. Smith · No follow-up needed
  5. Staining started

Illustrative values. Not yet for sale. In development.

Reserve S1 for your lab.

Free, with no obligation to order. Or order V1 and get an S1 demo kit.

Your lab records what’s on the slide. S1 records what happened to it.

Images, reports, LIS fields and instrument logs tell part of the story. S1 adds the slide’s own record of temperature, elapsed time and handling.

Already in your records

  • Slide images
  • Pathology reports
  • LIS fields
  • Instrument logs

S1 adds

  • Temperature measured on the slide
  • Timestamped readings
  • Recorded movement and impacts
  • An append-only record stored on the slide

Capture what you can’t see.

A protocol says what should happen. S1 records what did, at the slide, on every run.

The label end of a Prova S1 slide, sealed, with one fine violet line where it meets the glass.

Inside S1

How it keeps its own record.

Sensors sealed inside the label end. The record stays with the slide from water bath to scan. Tap your phone to read it.

01Handling

0.19g

Steady. Peak over the last 30 minutes, on three axes.

02Temperature

60.0°C

In spec, 58 to 62 °C. 1.0 °C spread across three sensor points.

03Record

214entries

Append-only. Slide S1-0264. Stored on the slide, read with a compatible phone.

  1. Drying started
  2. Mounting started

04Time

00:19:41

Step 3 of 7, drying. Every reading carries its own timestamp.

Once the slide is stained, its history is gone. S1 keeps it.

Illustrative values. Not yet for sale. In development.

One slide. Every step, measured.

  1. 09:08Flotation bath

    The record starts when the section lands.

    45.1 °C38 s in the bath

  2. 09:21Slide dryer

    The heat it actually saw, for as long as it saw it.

    59.8 °C30 min in the oven

  3. 10:03Stainer

    Every heated step, on every run.

    95.0 °Cantigen retrieval

  4. 13:58Coverslipper

    Handled, counted, time-stamped.

    6 movesafter 1 h 27 min in the queue

  5. 14:14Scanner

    It arrives with its whole history.

    2.4 gpeak shock, logged

Example journey

Current reading21.0 °C09:06

The Prova Record™

Know which slide, when, and by how much.

Read the slide

Hold the top edge of your phone against S1’s label end. Keep it still until the read is complete.

Read S1

Follow your phone’s scanning prompt.

When something goes wrong, know where to look.

Find the step.

When a stain is weak, review the recorded conditions to see which steps need a closer look.

Have the record ready.

When a result is questioned, the slide’s Prova Record™ is already there.

Show your work.

Bring the slide’s recorded history into QA reviews, investigations and inspections.

A measured history. For every slide you run.

Every S1 adds to your lab’s record. It builds with every run, and it is evidence that images and logs can’t supply.

Built for the lab you already run

Designed to go where your slides go.

S1 keeps the standard 75 × 25 mm footprint and is designed for the baths, dryers, stainers, coverslippers and scanners you already use.

  1. Flotation bath Leica HI1210
  2. Slide dryer Thermo Scientific Heratherm
  3. Stainer Roche BenchMark ULTRA PLUS
  4. Coverslipper Leica CV5030
  5. Scanner Leica Aperio GT 450

One format. Many workflows.

  • Leica BOND‑PRIME
  • Leica BOND‑MAX
  • Agilent Dako Autostainer Link 48
  • Biocare ONCORE Pro
  • Epredia Lab Vision Autostainer 360
  • Leica HistoCore SPECTRA ST
  • Sakura Tissue‑Tek Prisma Plus
  • Leica ST5020 Multistainer
  • Thermo Scientific Heratherm OGS60
  • CellPath Mini Section Dryer
  • Leica Aperio GT 450
  • Hamamatsu NanoZoomer S360
  • Boekel Deluxe Lighted Tissue Flotation Bath
  • Leica CV5030
  • Roche VENTANA DP 200
  • 3DHISTECH Pannoramic 1000
  • Sakura Tissue‑Tek Film
  • Leica IP S
  • Epredia SlideMate AS
  • Epredia E1000 Dx
  • Grundium Ocus 40
  • Leica HistoCore CHROMAX ST
  • StatLab PiSmart S1
  • Milestone PRESTO PRO
  • Leica BOND‑III
  • Agilent Dako Omnis 165 Duo
  • Sakura Tissue‑Tek Genie
  • Biocare intelliPATH+
  • Roche VENTANA HE 600
  • Leica HistoCore SPECTRA CV
  • Epredia Gemini AS
  • ZEISS Axioscan 7
  • CellPath High Capacity Section Dryer
  • Agilent Dako Artisan Link Pro
  • Leica Aperio AT2
  • Leica HistoCore Water Bath M
  • Epredia Digital Paraffin Flotation Bath
  • Philips IntelliSite SG300
  • Roche VENTANA DP 600
  • Sakura Tissue‑Tek Glas g2
  • Epredia ClearVue
  • Epredia SlideMate Laser
  • Primera Signature
  • Motic EasyScan Infinity 100
  • Huron TissueScope iQ
  • Leica HistoCore CHROMAX CV
  • Sakura Tissue‑Tek SmartWrite

S1 keeps the 75 × 25 mm footprint. No platform is validated yet. Compatibility is validated platform by platform.

Explore S1

It’s just a slide. That’s the point.

75 × 25 mm. Rotate it here, or see it on your bench in AR.

See it on your bench.Scan with your iPhone or Android phone to place S1 at true size.

A closed charcoal Prova S1 carton, marked 30 slides, with one fine violet line across its top. As you scroll, the carton slides away from a tray of thirty S1 slides standing on edge, and the violet seam on each slide lights in turn as a phone passes over them.

S1, in the box

Arrives ready. Wakes with the Prova app.

01Open

Thirty S1 slides to a carton. Slide the tray out.

02Pass

Pass a phone across the tray. Each slide answers with its seam.

03Run

Thirty slides awake and on the record. Load them where your slides already go.

Illustrative. Not yet for sale. In development.

Free reservation

Be first in line.

Reserve S1 for your lab. It’s free, with no obligation to order. We’ll contact you before the first production run.

Your role
Slides processed per month
When would you like to evaluate S1? Optional

We’ll only use these details to contact you about S1.

Proof for every patient.

S1 records, app screens, values and scenarios on this page are illustrative. AR viewing needs a recent iPhone, iPad or ARCore Android device.

Prova S1 is not yet for sale. In development. Planned capabilities; performance and instrument compatibility require validation. Reservations are free and are not orders.

Instrument names are trademarks of their respective owners. Prova is not affiliated with or endorsed by them.